Report item
Item specifics
  • Case Material: Aluminum
  • Supporting Hard Drive Capacity: 2TB
  • Products Status: Stock
  • Brand Name: Uneatop
  • External Interface: USB
  • Package: Yes
  • Size: 2.5"
  • Internal Interface: SATA
  • Model Number: UT62200U3M
  • Item: 2.5inch External HDD Enclosure
  • Color: Black
  • Material : Aluminum alloy
  • Advantage: Hot-swap/Without drives
  • OEM: Welcomed
  • Interface: SATA
  • USB3.0: HDD Enclosure
  • Certificate: CE RoHS FCC
  • Place of Origin: Guangdong China (Mainland)
Product Description

 description

  • For 2.5-inch hard drive (SATA I/II/III/1.5Gbps/3.0 Gbps/6Gbps
  • This product is for 2.5 HDD SATA interface only,   other interface SSD does not support.
  •  This product supports 2.5 inch SATA 6Gbps SSD,  If the device SATA II 3.0Gbps, the transmission speed will be capped at  3.0Gbps
  •  Support 2TB (July 2016, the latest support   information, please consult the customer support center   
  • Because the Windows XP operating system hard   drive size limit does not exceed 2TB, (the above   of 2TB hard disk in Windows Vista/7/8/10, Mac  OS in use, not the product limit)
  •  Load/remove the SSD can cause slight scratches disk assembly method)(Hard before you install the hard drive)

 

 RAID MODE

  1.  At first please set the switch for the RAID level selection to CLEAR.Now please Press the SET button and power on the device while keeping the SET button pressed.After 5 seconds release the SET button.
  2. Shift the RAID level switch to your preferred RAID mode(CLEAR/RAID 0/RAID 1/JBOD) and power off the unit.    
  3.  Again press and hold the SET button while powering on the unit and keep it press for about 5 seconds.   

 

  • CLEAR Mode: In this mode,device will create two hard drives into a single hard drive separately.
                              Storage drives policy enables each hard drive to be separately as one drive.
 
  • RAID0 (FAST): RAID 0 is the segmentation of logically sequential data,such as a single file,so that segments can be assigned to multiple hard disks in a round-robin fashion and thus written currently.Advantage of RAID 0 is to achive high performance by accummulating each individual hard disk performance .however ,if any one hard disk gets defective,information stored in this RAID 0 will be invalid.

  • RAID1 (SAFE):RAID 1 is the replication of data onto separate hard  disks in real time to ensure continuous availability. Device will also make use of same size disk space in each hard disk of RAID 1. That is, device will write data to the same disk space in each hard disk. When reading data, Failure in a hard disk device then will enter on-line-auto-rebuild mode automatically.

  • JBOD (Volume): In this mode, device will concatenate all of the hard drives into a single hard drive with larger capacity For example, if two 500GB hard disks is connected to device in concatenating mode, user will get a singl hard disk with capacity of 1,000 GB.

  • Rebuild Mode:In RAID1 MODE, there is one HDD damaged and device will automatically carry out the rebuild.When HDD damaged Hard disk LED sends red light. During rebuilding RAID device panel HDD LE glitter in turn with blue lights .When LED send blue light showed that the RAID has been rebuild

Troubleshooting:If a suspected case of failure occurred, please try to exclude according to the following approach. Device cannot be identified.

 

faq

 

*Are power and signal cable connected correctly?

*Is the power LED blue light?

*Is drivers installed correctly?

*Is the driver the latest version?

*Windows XP can\'t identify the HDD over 2TB capacity.

*When two or more hard disk are installed,  verify the correct installation shown below.

USB3.1 be recognized as USB2.0.

Try to power off your computer and connect the  cable again.

USB3.0 be recognized as USB2.0.

→Try to power off your computer and connect the   cable again.

Some HDD cannot display in my computer.  (Windows)

→Make sure the hard disk code can only use C ~ Z, do not exceed the range.

When using a new HDD, the HDD cannot be recognized by my OS.

→Please format the HDD.

When using a PC or a Mac system, it cannot  recover from hibernation

→This product does not support PC or Mac Hibernation mode, remove the product before   entering hibernation.

When connect a 2TB HDD, the capacity only   show 1.8TB.

→Most hard disk manufacturers use decimal  but the OS uses duodecimal to calculate the  HDD capacity.

   Due to different calculation methods will be  less about 200GB.

   Only 2TB capacity can be identified when using a HDD over 2TB.(Windows10/ Windows8/Windows7/Vista)

→Please use GPT format for over 2TB capacity.

Packaging Details
  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 20cm x 14cm x 5cm (7.87in x 5.51in x 1.97in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 20cm x 14cm x 5cm (7.87in x 5.51in x 1.97in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.